Author Archive | Sandy Ganz

DIY Coil Winder Project

This is an automotive project that is really to build a DIY Ignition system. I had found a DIY project to build a Multi-Spark Ignition system for one of the cars. The project was a few year old in an Australian electronics magazine and has gone over a couple of revisions over the years. I […]

Continue Reading 0

Chevy LSX Intake Torque Sequence

Been slow to post updates to the GTSparkplugs.com site. This installment is the intake manifold for the popular Chevy LSX series of engine. Their are a boat load of different manifolds and styles for these series of engines. If you are running an aftermarket intake they should give specific instructions for how to torque it […]

Continue Reading 0

Holley Made In China

  While I had the Sunbeam Tiger engine on the Dyno at QMP racing (Here is the dyno video) I got a call from Mike who kicked a$$ building  the engine. He was running the Tigers SBF on the dyno and said that the carb I supplied was hurting HP a bit, likely too small […]

Continue Reading

EZ Horn Wiring

Adding more stuff to GTSparkplugs.com In this installment I have added some basic information on automotive horns and how to use relays to wire them up. The page will show basic horn types, electric, air and how to hook them up. Sample wiring diagrams and parts are shown for your wiring pleasure. Enjoy! Introduction to […]

Continue Reading
Introduction to car relays

Introduction to Relays

While working on my Sunbeam Tiger project I had completely re-wired a new dashboard with Speedhut gauges and used a bunch of relays in the project. A few people from the Tiger Facebook page seemed to be afraid of wiring and as such I decided to do an Introduction to Automotive Relays page. I has […]

Continue Reading

The home of Smokey Bleach Burnouts